911爆料网

The ultrasonic cleaning technology for laboratory cleaning mainly considers that its cleaning method is more environmentally friendly, cleaning efficiency is high, cleaning effect is good, and it has advantages that other cleaning methods cannot compare. With the better and faster development of ultrasonic cleaning technology, the laboratory ultrasonic cleaning machine will be more widely used in the cleaning and maintenance of laboratory equipment, and the corresponding ultrasonic cleaning machine has a hub in the laboratory.

实验室仪器在使用中会粘附油脂、汗渍、实验物体等污物，如存放不清洗会产生生锈、发霉，这不仅会影响实验室仪器的使用寿命，还会影响用户背后的实验效果。过去实验室的清洁有两种方式，种是用铲、刮、刷等方式进行清洁，另一种是用各种化学去污溶剂进行清洁。因为这两种方式的弊端，清洗不干净，造成环境污染等问题，于是实验室单槽超声波清洗机出现在实验室仪器去污的高要求下。

Laboratory instruments will adhere to grease, sweat, experimental objects and other contaminants in use. If they are stored without cleaning, rust and mildew will occur, which will not only affect the service life of laboratory instruments, but also affect the experimental effect behind users. In the past, there were two ways to clean the laboratory. The first was to use shovels, scrapers, brushes, etc., and the other was to use various chemical decontamination solvents. Because of the drawbacks of these two methods, the cleaning is not clean, causing environmental pollution and other problems, so the laboratory single tank ultrasonic cleaner appears under the high requirements of laboratory instrument decontamination.

说了单槽超声波清洗机在实验室中很重要，那么单槽超声波清洗机在实验室中有哪些作用呢?，单槽超声波清洗机的本质作用是清洗，所以它的主要作用是清洗实验设备。比如烧杯等容器。很多实验容器都比较细长，内壁上的污垢往往要也不足为奇了，手工擦洗很难到位，残留的污垢可能会直接影响实验结果。这需要用超声波清洗仪来了。只需放入清洗槽中，注满水，几分钟能将容器内外清洗干净，彻底去除污垢，不留死角。

Said that the single tank ultrasonic cleaning machine is very important in the laboratory, then what are the functions of the single tank ultrasonic cleaning machine in the laboratory? First of all, the essential role of the single tank ultrasonic cleaner is cleaning, so its main role is to clean experimental equipment. Such as beakers and other containers. Many experimental containers are thin and long, so it is not surprising that the dirt on the inner wall often needs to be removed. It is difficult to scrub manually, and the residual dirt may directly affect the experimental results. This needs to be removed with an ultrasonic cleaner. Just put it into the cleaning tank, fill it with water, and the inside and outside of the container can be cleaned in a few minutes to completely remove dirt without leaving dead corners.

为什么单槽超声波清洗机可以容器内壁的污垢呢?因为它的工作原理是利用高频超声波转化为机械动能，使液体在清洗罐内的作用下，使液体产生空化效应，形成成千上万个微小的气泡，气泡迅速破裂并产生冲击力，锤沉在液体表面，使污垢脱离表面，达到清洗的效果。其次，由于超声波清洗仪的工作原理，这种仪器设备在实验室中有其独特的作用，用于实验材料的混合、乳化、分离、提取等，效果非常好。

Why can the single tank ultrasonic cleaner remove the dirt on the inner wall of the container? Because its working principle is to convert high-frequency ultrasonic into mechanical kinetic energy, so that under the action of the cleaning tank, the liquid will produce cavitation effect and form thousands of tiny bubbles. The bubbles will break quickly and produce impact force, and the hammer will sink on the liquid surface, leaving the dirt off the surface to achieve the cleaning effect. Secondly, because of the working principle of the ultrasonic cleaning instrument, this instrument and equipment has its unique role in the laboratory. It is used for mixing, emulsifying, separating and extracting experimental materials with very good results.