911爆料网

　　通过式喷淋清洗机洗不干净可能有以下几个原因：

　　There may be several reasons why the through spray cleaning machine cannot clean thoroughly:

　　水压问题 ：

　　Water pressure issue:

　　如果水压过低，喷淋力度不够，无法有效冲刷餐具表面的污垢。

　　If the water pressure is too low and the spraying force is not sufficient, it will not be able to effectively wash away the dirt on the surface of the tableware.

　　检查水龙头的水压是否正常，并确保水管没有堵塞。

　　Check if the water pressure of the faucet is normal and ensure that the water pipe is not blocked.

　　餐具摆放错误 ：

　　Dishware placement error:

　　餐具摆放得过于拥挤或者相互覆盖，喷淋系统无法充分覆盖到每个餐具表面。

　　The tableware is placed too crowded or covered with each other, and the sprinkler system cannot fully cover the surface of each tableware.

　　确保每个餐具之间留有足够空间，以便水可以喷洒到所有餐具表面。

　　Ensure that there is enough space between each utensil so that water can spray onto all utensil surfaces.

　　洗涤剂问题 ：

　　Detergent issue:

　　使用洗涤剂量不足或者质量不佳，无法有效分解油脂和污垢。

　　Insufficient detergent dosage or poor quality cannot effectively decompose oil and dirt.

　　选择质量可靠的产物，并按照说明书的要求使用适量的洗涤剂。

　　Choose products with reliable quality and use an appropriate amount of detergent according to the instructions.

　　喷淋系统问题 ：

　　Spray system issues:

　　喷淋臂转动不顺畅，可能是有餐具阻碍喷淋臂的正常转动，或者喷淋臂上的喷水孔被堵塞。

　　The spray arm is not rotating smoothly, which may be due to tableware obstructing the normal rotation of the spray arm, or the spray hole on the spray arm being blocked.

　　检查喷淋臂旋转是否正常，喷射臂上小孔是否堵塞，喷射臂轴是否有磨损或脱落。

　　Check if the spray arm rotates normally, if the small holes on the spray arm are blocked, and if the spray arm shaft is worn or detached.

　　加热和过滤问题 ：

　　Heating and filtering issues:

　　如果加热器冷凝水没有顺利排出或水垢积聚，可能会导致清洗液温度上升缓慢。

　　If the condensed water from the heater is not discharged smoothly or scale accumulates, it may cause the temperature of the cleaning solution to rise slowly.

　　过滤器杂物积聚未及时清洗，阻力较大，也会影响清洗效果。

　　The accumulation of impurities in the filter and failure to clean it in a timely manner can cause significant resistance and also affect the cleaning effect.

　　水质问题 ：

　　Water quality issues:

　　使用的水源如果不符合要求（如软化水或纯水标准），可能会导致器械上有白斑或残留物。

　　If the water source used does not meet the requirements (such as softened water or pure water standards), it may cause white spots or residues on the equipment.

　　确保使用的水源为软化水或纯水，并且电导率符合要求。

　　Ensure that the water source used is softened water or pure water, and that the conductivity meets the requirements.

　　其他故障 ：

　　Other faults:

　　检查循环泵是否有翻转现象，循环管路是否有泄漏，管卡是否松动。

　　Check if there is any flipping phenomenon in the circulation pump, if there is any leakage in the circulation pipeline, and if the pipe clamp is loose.

　　清洗架喷射臂旋转是否正常也需要检查。

　　It is also necessary to check whether the spray arm of the cleaning rack rotates normally.

　　针对以上可能的原因，可以逐一排查并，以提高通过式喷淋清洗机的清洗效果

　　For the possible reasons mentioned above, they can be investigated and resolved one by one to improve the cleaning effect of the through type spray cleaning machine

　　本文由通过式喷淋清洗机提供技术支持，更多的详细精彩内容请点击我们的网站，我们将会全心全意为您提供满意的服务。

　　This article is supported by a through type spray cleaning machine. For more detailed and exciting content, please click on our website We will wholeheartedly provide you with satisfactory service.