911爆料网

一、在服务业中的应用：日常生产中，眼镜、首饰都可以用超声波进行清洗，速度快，无损伤，大型的宾馆、饭店用它清洗餐具，不仅清洗效果好，还具有杀灭病毒的作用。

1、 Application in the service industry: In daily production, glasses and jewelry can be cleaned using ultrasound, which is fast and non-destructive. Large hotels and restaurants use it to clean tableware, not only with good cleaning effect, but also with the function of killing viruses.

二、超声波在微粉业的应用：众所周知，要取得不同大小的颗粒，是把破碎料放在球磨机内研磨后，经过不同规格筛子层层筛分而得的。筛子长时间使用后，筛孔会被堵塞（如金刚石筛），用其它方法刷洗会破坏筛子，且效果不理想，经过众多厂家的试验后，用超声波清洗机，不仅不损坏筛子，而且筛子上面的堵塞颗粒完全被回收。

2、 The application of ultrasound in the micro powder industry: As is well known, to obtain particles of different sizes, the crushed material is ground in a ball mill and screened layer by layer through different specifications of sieves. After long-term use, the sieve holes will be blocked (such as diamond screens), and brushing with other methods will damage the sieve, and the effect is not ideal. After many manufacturers have tested it, using an ultrasonic cleaning machine not only does not damage the sieve, but also the blocked particles on the sieve are completely recovered.

叁、超声波在制药工业的应用：超声波清洗技术经过众多制药公司的应用而得到广泛使用，特别是对西林瓶、口服液瓶、安瓶、大输液瓶的清洗以及对丁基胶塞、天然胶塞的清洗方面，已经得到首肯。对于瓶类的清洗，是用超声波清洗技术代替原有的毛刷机，它经过翻转注水、超声清洗、内外冲洗、空气吹干、翻转等流程而实现的。

3、 The application of ultrasound in the pharmaceutical industry: Ultrasonic cleaning technology has been widely used by many pharmaceutical companies, especially in the cleaning of penicillin bottles, oral liquid bottles, ampoules, and large infusion bottles, as well as the cleaning of butyl rubber stoppers and natural rubber stoppers, and has been approved. For bottle cleaning, ultrasonic cleaning technology is used instead of the original brush machine, which is achieved through processes such as flipping water injection, ultrasonic cleaning, internal and external flushing, air drying, flipping, etc.

四、超声对滤芯的清洗：我们知道，无论何种材质的过滤器或无论何种用途的过滤器，使用一段时间后，都会由于杂质而造成通透性降低而报废，普通滤芯较低还可以，但对于化纤行业，一只进口滤芯，近万元，弃之实在可惜，我们同其它科研单位合作研制的超声波滤芯清洗机，采用聚能型超声波清洗机，它可把1KW以上的能量集中在200×20mm2 的辐射面上，超声强度大，能够快速将堵塞物去除，同时设备采用反过滤装置，只要您提供波芯，我们可为您提供整套清洗装置。（该设备洗一根滤芯的时间为10—15分钟）。适用于PP绵滤芯、活性炭滤芯、中空纤维滤芯陶瓷膜滤芯。

4、 Ultrasonic cleaning of filter cartridges: We know that filters of any material or purpose will be scrapped due to reduced permeability caused by impurities after use for a period of time. Ordinary filter cartridges are relatively cheap, but for the chemical fiber industry, a single inlet filter cartridge costs nearly ten thousand yuan. It is a pity to abandon it. The ultrasonic filter cartridge cleaning machine developed in cooperation with other scientific research units uses a concentrated energy ultrasonic cleaning machine, which can concentrate more than 1KW of energy on a 200 × 20mm2 radiation surface. It has high ultrasonic intensity and can quickly remove blockages. At the same time, the equipment uses an anti filtration device. As long as you provide a wave core, we can provide you with a complete cleaning device. The time for washing a filter element on this device is 10-15 minutes. Suitable for PP cotton filter, activated carbon filter, hollow fiber filter, ceramic membrane filter.

五、超声波对金属的清洗：众所周知，金属棒材经挤压成丝后，金属丝的外部往往有一层碳化膜和油，用酸清洗或其它清洗方法，很难让污物去除（尤其整盘丝），超声波洗丝机是根据实际生产需要而设计的一种连续走丝，清洗设备，粗洗部分由清洗液储槽、换能器、循环泵、过滤器及配套管道系统组成，金属丝经超声波粗洗精洗后，再经过吹干，从而完成整个清洗过程。整套设备集成控制，简洁、方便、效果好，广泛用于钽丝、钨丝、钼丝、铌丝、铜丝（绝缘漆涂覆前）等其它金属丝。

5、 Ultrasonic cleaning of metals: As is well known, after metal bars are extruded into wires, there is often a layer of carbonized film and oil on the outside of the wire. It is difficult to remove dirt (especially the entire wire) using acid cleaning or other cleaning methods. Ultrasonic wire washing machine is a continuous wire walking and efficient cleaning equipment designed according to actual production needs. The rough washing part is composed of a cleaning solution storage tank, a transducer, a circulation pump, a filter, and a supporting pipeline system. The metal wire is cleaned by ultrasonic rough washing and fine washing, and then blown dry to complete the entire cleaning process. The entire equipment integrates control, which is simple, convenient, and effective. It is widely used for tantalum wire, tungsten wire, molybdenum wire, niobium wire, copper wire (before insulation paint coating) and other metal wires.

六、超声波清洗技术在磷化处理中的应用：产物喷涂前处理工艺非常重要，一般的传统工艺使用酸液对工件进行处理，对环境污染较重，工作环境较差，同时，的弊端是结构复杂零件酸洗除锈后的残酸很难冲洗干净。工件喷涂后，时间不长，沿着夹缝出现锈蚀现象，破坏涂层表

6、 The application of ultrasonic cleaning technology in phosphating treatment: The pre-treatment process of product spraying is very important. Generally, traditional processes use acid solution to treat workpieces, which causes heavy environmental pollution and poor working environment. At the same time, the biggest drawback is that the residual acid after acid cleaning and rust removal of structurally complex parts is difficult to clean. After spraying the workpiece for a short time, rust appeared along the gap, damaging the coating surface