911爆料网

1. The ultrasonic adopts a generator with an efficiency of up to 95%, and the power is adjustable from 0 to ; Using high-frequency ultrasonic frequencies such as 40KHz, 68KHz, and 80kHz;

2、高压喷淋可有效后工序纯水纯度问题，有效降低纯水消耗；

2. High pressure spraying can effectively solve the purity problem of pure water in subsequent processes, effectively reducing pure water consumption;

3、独特的慢拉脱水，循环热风干燥方式，；

3. Unique slow pull dehydration and circulating hot air drying method, safe and environmentally friendly;

4、多槽超声波清洗工艺确保清洗效果；

4. Multi slot ultrasonic cleaning process ensures cleaning effect;

5、高度标准化：技术熟练、经验丰富；

5. Highly standardized: skilled and experienced;

6、使用范围：适用于各种光学产物的清洗，如液晶基板元器件、罢贵罢、液晶玻璃；

6. Scope of use: Suitable for cleaning various optical products, such as LCD substrate components, TFT, and LCD glass;

7、清洁：多通道设计能有效产物污垢；

7. Cleaning: Multi channel design can effectively solve product dirt;

8、传动系统：全自动多臂自动升降，采用全铝机械结构，运行平稳，整体结构坚固，维修方便，技术成熟；

8. Transmission system: fully automatic multi arm automatic lifting and lowering, using an all aluminum mechanical structure, stable operation, solid overall structure, convenient maintenance, and mature technology;

9、采用电机，可有效控制机器各传动部分的速度，并采用定位（专用电机+传感器），确保清洗蓝准确落入槽内，各工位清洗时间可调。

9. Using high-quality motors, the speed of each transmission part of the machine can be effectively controlled, and positioning (dedicated motor+sensor) is used to ensure that the cleaning blue accurately falls into the slot, and the cleaning time of each workstation can be adjusted.

液晶玻璃光学超声波清洗机简单故障排除：

Simple troubleshooting of LCD glass optical ultrasonic cleaning machine:

1、电源开关无法启动：检查主继电器是否损坏；

1. The power switch cannot be started: check if the main relay is damaged;

2、油箱加热故障；检查油箱的加热元件是否完好；

2. Fuel tank heating failure; Check if the heating element of the fuel tank is intact;

3、超声波不工作：检查超声波电源元件是否损坏，换能器是否短路；

3. Ultrasonic does not work: Check if the ultrasonic power supply components are damaged and if the transducer is short circuited;

4、超声波衰减：如果换能器受到湿气、导电灰尘污染和强烈冲击、漏电的影响，短路、击穿、擦痕甚脱落，导致超声波衰减；

4. Ultrasonic attenuation: If the transducer is affected by moisture, conductive dust pollution, strong impact, leakage, short circuit, breakdown, scratches, or even detachment, resulting in ultrasonic attenuation;

5、如果换能器或超声波发生器损坏，应立即停止使用，并及时维修。

5. If the transducer or ultrasonic generator is damaged, it should be stopped immediately and repaired in a timely manner.

本文由多槽手动超声波清洗机提供技术支持，更多的详细精彩内容请点击我们的网站 ，我们将会全心全意为您提供满意的服务。

This article is supported by a multi slot manual ultrasonic cleaning machine. For more detailed and exciting content, please click on our website We will wholeheartedly provide you with satisfactory service.