911爆料网

Ultrasonic cleaning machine is a highly precise cleaning scientific equipment. In our daily use, it is normal to have some small exceptions with small probability. In addition to daily equipment maintenance, pay attention to the use mode, operation process or environmental location. If the usage is improper or the internal and external environment changes seriously, the usage may be asymmetric. What are the common abnormalities and countermeasures of ultrasonic cleaning machine? Let's talk about it.

1.超声波清洗机设备外壳带电。

1. The shell of the ultrasonic cleaner is charged.

在这种情况下，多是由于电热元件绝缘不良或其他元件电路连接不良。一般可以通过更换绝缘不良的元器件和接地线来。如果超声波清洗机的外壳外有电，影响会很大，厂商一定要重视。如果发现超声波清洗机带电，先停机，再对故障进行初步判断，由人员进行测试评估，确认方案。

In this case, it is mostly due to poor insulation of the heating element or poor connection of the circuit of other elements. Generally, it can be solved by replacing components and grounding wires with poor insulation. If there is electricity outside the shell of the ultrasonic cleaner, the impact will be great, and the manufacturer must pay attention to it. If it is found that the ultrasonic cleaner is charged, stop the machine first, and then make a preliminary judgment on the fault. Professional personnel will conduct test and evaluation to confirm the solution.

2.超声波清洗机里没有超声波。

2. There is no ultrasonic in the ultrasonic cleaner.

如果在使用超声波清洗机的过程中，突然没有超声波，说明设备没有电加热。要检查电源，然后检查温控器设定的位置是否正常。确定非温控器问题后，要检查水位开关和电加热器是否有故障。如果有相关部件或易损件工作不正常，应尽快更换故障部件。

If there is no ultrasonic wave in the process of using the ultrasonic cleaner, it means that the equipment is not electrically heated. First, check the power supply, and then check whether the set position of the temperature controller is normal. After determining the non temperature controller problem, check whether the water level switch and the electric heater have faults. If relevant components or wearing parts do not work normally, replace the faulty components as soon as possible.

3.超声波清洗机的声音不正常。

3. The sound of the ultrasonic cleaner is abnormal.

超声波发生器或换能器的异常清洗效果下降。检查传感器引线两个端子的绝缘电阻，拆下传感器护罩，检查是否有异常；还要看超声波清洗机的声音是否让某些换能器无法适应缸体、水位、水温的变化。改变水位，工件在进入或离开水面时不能移动太大。如果是夏天高温超声波清洗机发出很大的噪音，考虑是不是散热问题。

Abnormal cleaning effect of ultrasonic generator or transducer is reduced. Check the insulation resistance of the two terminals of the sensor lead, remove the sensor shield and check whether there is any abnormality; It also depends on whether the sound of the ultrasonic cleaner makes some transducers unable to adapt to changes in the cylinder body, water level and water temperature. Change the water level, and the workpiece cannot move too much when entering or leaving the water surface. If the high-temperature ultrasonic cleaner makes a lot of noise in summer, consider whether it is a heat dissipation problem.

以上是为大家介绍的有全自动超声波清洗机的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务

The above is a detailed introduction of the fully automatic ultrasonic cleaning machine. I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services