911爆料网

齿轮清洗机是一台采用特制链条传动输送工件，具有清洗、漂洗、风切水、烘干、喷油防锈等功能的新颖连续式清洗设备。由人工将工件洗篮放在传动链条网带上，依次通过喷淋清洗室、超声波清洗室、喷淋漂洗室、超声波漂洗室、切水室、烘干、喷油防锈，完成清洗、漂洗、烘干、喷油防锈等流程后出料。
Gear cleaning machine is a new continuous cleaning equipment with the functions of cleaning, rinsing, wind cutting, drying, oil spraying and rust prevention, which uses special chain transmission to transport workpieces. The work-piece washing basket is manually placed on the transmission chain mesh belt, and the material is discharged after completing the processes of cleaning, rinsing, drying, oil spray and rust prevention through the spray cleaning room, ultrasonic cleaning room, spray rinsing room, ultrasonic rinsing room, water cutting room, drying, oil spray and rust prevention.
清洗液经净化处理可循环使用，上罩内的雾气经吸雾风机抽出后外排出到总排气管道中去。齿轮清洗机具有工位多，功能全，结构合理，操作方便，清洗效果好的优点，对于流水线零件的清洗，改善劳动环境，提高清洗和吹干质量，具有重要的意义。
The cleaning solution can be recycled after purification. The fog in the upper hood is pumped out by the mist suction fan and then discharged into the main exhaust pipe. The gear cleaning machine has the advantages of multiple stations, complete functions, reasonable structure, convenient operation and good cleaning effect. It is of great significance to the cleaning of assembly line parts, improve the working environment, and improve the cleaning and drying quality.

齿轮清洗机主要用于汽车同步器等的表面清洗、吹干烘干、喷油防锈。汽车齿轮表面附着的硬物质经过超声波处理后，根据超声波工作原理，使附着物与金属表面脱离，再经过高压喷淋冲洗后,能够彻底清洗金属工件上的硬物质和油污，从而达到人工无法相比，清洗度达到理想的清洗效果。
Gear cleaning machine is mainly used for surface cleaning, drying and oil spray rust prevention of automobile synchronizers. After ultrasonic treatment, the hard substance attached to the surface of the automobile gear can be separated from the metal surface according to the ultrasonic working principle, and then the hard substance and oil stain on the metal workpiece can be thoroughly cleaned after high-pressure spray washing, so as to achieve the ideal cleaning effect.
齿轮清洗机的过滤循环系统由粗、精过滤两部分组成。粗过滤是将清洗产物的回流液，循环经过磁性吸附及丝网粗过滤分离组成。在清洗过程中，清洗回流液中金属物经过磁性吸附分离。颗粒物经丝网粗步过滤后，再由高压泵送入精细过滤系统，这样可以大大的提高精细过滤芯使用寿命，节约了成本。
The filtration circulation system of the gear cleaner consists of two parts: coarse filtration and fine filtration. Coarse filtration is composed of circulating the return liquid of cleaning products through magnetic adsorption and screen coarse filtration. During the cleaning process, the metal objects in the cleaning reflux are separated by magnetic adsorption. The particles are filtered by the wire mesh and then sent to the fine filtration system by the high-pressure pump, which can greatly improve the service life of the fine filter element and save costs.
精过滤器是由过滤桶内的精细过滤芯的高压过滤，用户可以自行更换清洗过滤桶内的滤芯，使产物达到更好的清洁度。喷淋系统把输送到喷淋区中的工件污物上下面经高压导向喷嘴逐个冲洗；变频调速系统的减速电机通过变频器无级调速可控制产物清洗时间的长短和工作效率。
The fine filter is the high-pressure filtration of the fine filter element in the filter barrel. Users can replace and clean the filter element in the filter barrel by themselves, so that the product can achieve better cleanliness. The spray system washes the upper and lower parts of the workpiece dirt conveyed to the spray area one by one through the high-pressure guide nozzle; The speed reduction motor of the variable frequency speed regulation system can control the cleaning time and working efficiency of the product through the stepless speed regulation of the frequency converter.