911爆料网

If the ultrasonic cleaner is used improperly, it will affect the normal work and cleaning effect. In order to ensure the specific use experience of the ultrasonic cleaning machine, it can be analyzed according to the power density of the ultrasonic cleaning machine, the cleaning time, temperature and other factors of the ultrasonic frequency machine and the specific use experience. The higher the temperature of the cleaning machine, the more conducive to the separation of stains. However, if the temperature reaches a certain range, it will affect the effectiveness of ultrasonic and reduce the cleaning effect of the cleaning machine.

清洗机的清洗时间应根据产物的不同进行设定，另外，除了材料、清洗剂和污渍的种类外，应用高功率密度较难的零件，应用低功率密度的零件，频率汽化程度较低，频率偏移效用大，对于简单表面、复杂表面和深孔，在工作中需要用高频超声波清洗机产生流场声，并能轻易将清洗剂加去。

The cleaning time of the cleaning machine should be set according to different products. In addition to the types of materials, cleaning agents and stains, high power density should be used to solve difficult parts, and low power density parts should be used, with low frequency vaporization degree and large frequency offset effect. For simple surfaces, complex surfaces and deep holes, high frequency ultrasonic cleaning machine should be used to generate flow field sound during work, and the cleaning agent can be easily added.

全自动超声波清洗机工作时，应尽量避免温度升高，以免影响设备的正常运行，要注意清洗剂的，禁止在超声波清洗机内有其他异常物体迸出，要经常维护和保养超声波清洗机，由于建议应立即清理干净槽底异物，更换或倒出清洗液，需要在常温下进行设备保养和清洗用具。

During the operation of the full-automatic ultrasonic cleaner, the temperature rise should be avoided as far as possible to avoid affecting the normal operation of the equipment. The safety of the cleaning agent should be paid attention to. It is forbidden to have other abnormal objects burst out of the ultrasonic cleaner. The ultrasonic cleaner should be maintained and maintained frequently. It is recommended that the foreign matters at the bottom of the tank should be cleaned immediately, and the cleaning solution should be replaced or poured out. The equipment maintenance and cleaning tools should be carried out at room temperature.

超声波清洗机正常工作时，应听到超声波声和槽内均匀的响声，不要搅动清洗液的表面，全自动超声波清洗线应只在清洗孔内洒水产生，在保证清洗对象整洁的前提下，窜好不要加温和间歇工作，由于加温和长时间的超声波会提高槽内温度。

When the ultrasonic cleaner works normally, the ultrasonic sound and the uniform sound in the tank should be heard. Do not stir the surface of the cleaning solution. The automatic ultrasonic cleaning line should only be produced by spraying water in the cleaning hole. On the premise of ensuring that the cleaning object is clean, Z should not heat up or work intermittently. The temperature in the tank will be increased due to heating and long-time ultrasonic.